How to make funko pop protectors

Excuse me! Watch this little instructional and walk along with us as we put up a set of V2 Premium Protectors, and you’ll have a much easier time doing it right the first time. Following the steps in this manual will ensure that your protectors go together smoothly and effectively. Any of our different-sized protectors may benefit from this method. Enjoy!

1. First, remove the paper insert. (only available with the purchase of 4-Inch V2 Premium Shields)
2. Step 2: Place thumbs inside the protector’s bottom, then press the edges with each other to activate the auto-locking bottom.
3. Third, insert your thumb along the wrinkle and lightly rub the protection up the folds.
4. Fourth, slip the side covers onto your thumb pads neatly, as demonstrated in the video. After the first 90-degree bend, the flaps may be folded inside and then unfolded again. Fold over again to complete the opposite side.
5. Fifth, fold the top flap inwards along the seam with your fingertips. Start the crease by pressing down with your thumb and pulling the flap down over your fingers. Having begun the crease, you may next fold the lid within the protection and double-check that it is well wrinkled.
6. Put your finger on the fold line, and then carefully fold the cover over your finger to complete Step 6. Once you’ve established the crease, a full fold is possible.
7. Then, put the figurine within the shield and snap it shut. After the closing flap has snapped into position, your POP! will be ready to be displayed. A ® like that ought to be flaunted.

Don’t feel hesitate to contact popfunkoprotectors.com with any inquiries, worries, or problems; we are here to assist you.

What does a UV pop protector do?

Should I spend more on a Funko Pop Protector since it’s UV resistant? We at funkopopprtectors.com wanted to let you know why our services do not support that function right now.

We put UV resistance through a quick and easy test to discover whether it really works. We began by taking two separate funko pop protectors bulk and shielding one with our homemade UV-unsafe shield and the other with a commercially available UV funko pop protectors. We also let them soak up the sun for over two months. Our results are as follows:

This test shows that even a protector treated to prevent UV radiation will still fade over time. The reasons why we’ve decided to exclude UV resistance are listed below.

• Protectors that claim to block UV radiation do so only partially. Even if you take precautions, your best funko pop protectors will still fade over time if they are exposed to direct sunlight. Only around 98% of Ultraviolet radiation is kept by museum-grade acrylic with UV protection; the amount of protection utilized in other guards is likely far lower.

• Even if they did, most collectors wouldn’t put their Pops in the sun often enough to warrant the expense. You shouldn’t have to worry too much about your Pops fading unless you keep them or put them on display near a window that isn’t often shaded or directly under fluorescent, old incandescent, or other high-UV light.

• Including such a function would increase the price of the protection by 35% to 50%. We do our utmost to prevent this and provide competitive pricing.

• The ideal solution is to invest in UV-blocking window film and/or LED lightbulbs (which generate very little or no UV rays) rather than purchasing individual UV-protective sleeves for each item.

• We at Popfunkoprotectors.com recognize and appreciate that every collector has their own preferences and practices when it comes to preserving their collection. This is simply a brief example to illustrate why Pop Fiend does not include UV protection in our shields.

When you decide to start a collection, a difficult choice will undoubtedly arise. You’ll either need to start stowing away custom funko pop protectors or construct extra shelves to showcase them. In addition, the issue with the Funko Pops packaging remains regardless of the path you choose. And how can you make use of those little yet crucial remarketing containers?

How do you protect funko pop boxes?

The fact is that you’ll need a place to put your bulk funko pop protectors. In order to guarantee the proper storage of your priceless relics, consider the following three guidelines.

Strategies for Organizing Your Funko Pops

Having a system in place for keeping your best pop protectors safe is no different from any other endeavor. It is prudent to begin by collecting all of the necessary packing materials and resources for securing the storage of these items. As a starting point, below is a short yet useful checklist:

• Packing cubes. A plastic storage bin or other sturdy container is fine for this purpose. Here are some ideas we came up with.
• Shipping tape. To prevent dust and moisture from getting inside, the tape should be used if the jar does not have its own cover. And if you intend to keep your hard funko pop protectors in storage for a long time.

• Crayons and Pointed Pens. Obviously not the pop vinyl protectors packaging. You’ll need them to create labels for your storage bins and inventory list (more on that below).
• Packing peanuts or foam sheets. It’s critical to keep those precious containers safe. Without sufficient cushioning, they will be damaged if they are stacked on top of each other. The use of interlayer material is an excellent starting point.

Wrapping each box individually is the best way to ensure that they arrive in one piece and that their sharp edges remain that way.

If you’re a devoted collector, at some point, your pop plastic protectors collection will grow to the point where you can’t possibly remember where each one is. Create an inventory of your storage space to know exactly which boxes go in which container. We recommend labeling each box with a number and a summary of its contents and sorting pop figure protectors into themed collections for easy access and organization.

In this manner, you can quickly get to the toys and boxes you need without having to dig through a bunch of storage containers to get to them. Keeps you from going insane, too!

It’s best to keep things in a cool, dry place that’s also rather dark. There is nothing more disheartening than putting a lot of time and effort into a collection, only to have everything damaged after you’ve retrieved the containers.

Funko Pops storage boxes:

When deciding how to keep your plastic funko pop protectors, this is a crucial factor to consider. You should choose a solution that can fit in the available area, preserve your valuables from dust and filth, and ideally also block out light. Take a look at these three successful solutions and learn about the advantages and disadvantages of each.

Plastic Storage Bins

Because you may get storage containers that are rather substantial in size, these boxes are great for storing extensive collectibles. As an advantageous feature, their covers may be locked onto the container itself. Correct sealing will prevent dirt, dust, moisture, and even insect intrusion.

Protect your items from the sun by storing them in an opaque container. The color of the bin might also serve as a visual cue when you’re trying to find something. Otherwise, you may just conceal a transparent container from view. If you use a see-through container, you may also assess its contents without breaking open the seal.

Although plastic storage containers are more expensive than boxes, they are well worth it if you have a valuable collection. In order to save money, wait until items go on sale, which often occurs after costly holidays like Christmas.

Corrugated Boxes

Containers are the best storage option for moderately sized collections. But keep in mind that they may have certain restrictions.

To avoid problems like dents, water damage, and insect infestation, you should always begin with a fresh new corrugated box. They survive long-term storage quite well (or else they wouldn’t be utilized throughout relocations), but you should avoid keeping them in damp, unclean, or contaminated environments.

After packing, use carton sealing adhesive to shut the boxes correctly to keep out dust and grime. To split funko pop hard plastic protectors boxes, you may use corrugated dividers in place of foam or paper if you don’t have any. Keep in mind that they might take up more room within the box and are susceptible to the same environmental hazards as the box itself.

We understand that this is a lot of cautionary languages. In any case, you’re coping with a priceless assemblage. If you put some thought into your packing and storage strategies in advance, you shouldn’t have any issues.

Folder Boxes:

A simple and effective solution is to use file folder boxes, especially if you have a tiny or rotating collection.

They take little time to assemble and usually include a hinged top for convenience. Most designs additionally have ruled writing surfaces to facilitate the organization and documentation of your storage system.

File boxes are also quite tiny, so you can’t store as many valuables inside. It seems like you can get roughly 16 of the regular wholesale pop protectors boxes for the current pricing. Since the top doesn’t make a seal and the side hand grips don’t prevent dust from getting in, they don’t provide as much protection as corrugated boxes or plastic containers.

You should make sure they suit your demands before investing in them since they are more expensive than both alternatives.

As with other things in life, success is most often achieved via careful preparation. You’ve spent a lot of time and effort building a collection you’re proud of, so we know you’ll devote at least a bit of both to keeping your Funko Pops safe. Let us see your finished product when you’re done with it!

How do you seal funko pops?

Look for a level, wide area to spread out on. Set up a dedicated shipping and packaging station if you send out Funko Pops and other memorabilia often. In this manner, you may keep your moving and storage materials within easy reach.

Layers of tissue paper are a good place to begin. It’s not required. However, it’s recommended if you care about the condition of your package during shipping. Tissue paper should be folded in and taped down (ordinary tape will serve for now) in a present-wrapping fashion before moving on to the bubble.

Quick hint: make use of a dispenser container. You may effortlessly rip out what you need from the bubble using no scissors since it is perforated every 12 inches.

A two-foot-long bubble cushion should be placed on the table, flat side down (so the bubbles press against the Funko box). Cover the box with the bubble, then fold the ends in and secure them with tape. It will help maintain order and save room in the box during transport.

Want to add some flair to your custom packaging? The Bubble Wrap® IB Expressions boxed dispensers are available for your inspection. Patterns like the red Hearts and the clear Thank You are great for mailing.

How to Choose the Appropriate Container

Avoid using boxes from grocery stores and thrift shops. It’s probable that they’ve been in contact with dampness, insects, or unsanitary surroundings. If you can, it’s best to use brand-new corrugated boxes or at least unopened ones.

Consider ordering in bulk if you’ve settled on a suitable package and realized you’d be routinely delivering Funko Pops. In terms of both time and money, having a stockpile of boxes ready to go may make the moving process much less stressful.

Examples of Appropriate Boxes

All the rage in the ’90s, Funko Pop! Size-wise, vinyl cases are around 3.75 by 4.75 by 6.25 inches. Consequently, before settling on a shipping box, make sure you’ve double-checked the dimensions.

One Action Figure Shipped? Specifically, we recommend an 8x8x8-inch box.

Can I Get Two Figures With My Shipment? We advise 12″ x 9″ x 6″

Packing the Shipping Box

Sending a thank-you card is optional but much appreciated. It’s a painless strategy for boosting customer loyalty!

Put your carefully wrapped Funko Pop! inside, and then tape the box shut securely. When using a tape dispenser gun, you can ensure a secure seal that also looks great.

If you want things to be very obvious, use a label and write on it or print one off. Labeling the box with “DO NOT STACK” will ensure that it is not stacked in transit. It’s not essential, but every little amount helps.

What are funko pop protectors made of

Don’t let the elements get to your Pop! Premium Pop! Protectors are constructed from durable plastic and are engineered to connect so that they may be securely piled on top of one another. Pop! Stacks’ iconic insignia appears on the lid, too.

How much does a pop protector weigh?

A majority of your Funko Pop collection probably consists of regular-sized figures. Each one is somewhat different in size and weight, but that’s because they’re all as unique as the characters themselves. Most Funko Pops will be roughly four inches tall. They usually weigh about four to five ounces.

What does a funko pop protector do?

This shield is the best method to show and preserve your Funko Pop figures since it protects not only the figures themselves but also their packaging.